ORATAPE® Series HT55 Decorative High Tack Film Application Tape

Digital, Silkscreen & Sign Supplies Since 1922

ORATAPE Series HT55 Decorative High Tack Film Application...

ORATAPE Series HT55 Decorative High Tack Film Application Tape
Grand Total: $90.35

WIDTHS: 1.25-60 IN (32-1524 MM) 
LENGTH: 100 YDS. (91.4 M) 

THICKNESS: 4.0-4.5 (100-113)


Specifically Designed to be the Best High Tack Tape to Pick up Matte Finish and Small Details, yet not Damage your Wall for Indoor Applications!

ORATAPE® Series HT55 Decorative High Tack Film Application Tape is optimized to provide trouble-free premasking and graphic application with plotter films that use silicone-coated release liners such as ORACAL® 631 Exhibition Cal, ORACAL® 8810 Frosted Glass Cast and ORACAL® 8510 Translucent Etched Glass Cal. The semi-transparent face film and special high-tack adhesive used in ORATAPE HT55 enable the production of pre-masked lettering and graphics that can be rolled, stacked and shipped without wrinkling, edge curling or tunneling.


Adhesive               Natural rubber, high adhesive power
Color                White/Translucent
Adhesion to Steel*              0.48 lb/in
Tensile Strength               Along: >17 lb/in , Across: > 17 lb/in
Elongation               3%
Shelf Life**               6 months

* Adhesion (FINAT TM-1, after 20 min.) on stainless steel at time of manufacture. **in original packaging, at 68°F and at 50% relative humidity


  • Removes easily following graphics application.
  • If adhesive touches adhesive, Conform pulls apart easily with no adhesive delamination.
  • Works well in either wet or dry applications with no adhesive transfer.


Tapes are only warranteed to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.