McLogan Supply Company : IC 108LF Glow In The Dark [MP108] - $35.00 - Specialty Plastisols

Digital, Silkscreen & Sign Supplies Since 1922

IC 108LF Glow In The Dark

IC 108LF Glow In The Dark
Grand Total: $35.00

108 Glow-In-The-Dark (phosphorescent) is a plastisol screen printing ink that produces a bright, greenish-yellow glow in a darkened area after it has been exposed to light. This product can be used for direct print or cold peel transfer applications.


100% cotton and some cotton/polyester white fabrics.  For best results on dark fabrics, 108LF must be printed over a white base.


60-230 t/in Monofilament


  1. 108LF Glow-in-the-Dark is a very transparent ink and works best when printed on white fabric or over a white base.
  2. 108LF Is not a low bleed ink.  Always test print the actual fabric to be printed before beginning production.   We suggest long term testing on fabrics to determine if there are going to be any dye migration or bleeding problems. Dye migration or bleeding may not occur right away.
  3. Do not fuse or cure the ink at too high a temperature (over 330°F or 166°C) as the phosphorescent pigment used in the ink can be damaged and not glow properly.
  4. Adding too much reducer, soft hand additive or clear base will diminish glow.
  5. Heavier ink deposits of 108LF will result in increased phosphorescence (glow brightness) and a longer glow after exposure to a bright light source.  Depending on the amount of light exposure to the ink, the darkness of the of the area where the ink is being viewed and the eye sensitivity of the person viewing the ink, the glow  may be visible anywhere from 30-seconds to several minutes. 
  6. When making cold peel transfers for dark fabrics, back transfers with white ink. 
  7. Cold peel transfers should be applied at 350°F to 375°F (177°C to 191°C), medium pressure (40 lbs.) for 10 to 15 seconds.  

People who purchased this item also purchased: