Ulano # 5 Stencil Remover Paste is a Ready-to-use paste for fast and thorough removal of direct emulsions, CDF Direct Films, and Pulsar indirect film from all types of mesh including metalized polyester. Instructions STEP 1: Remove ink with the proper solvent. STEP 2:Degrease first with Screen Degreaser Liquid  No. 3 to remove solvent residues and to help speed the action of the stencil remover. Rinse thoroughly. STEP 3: Use a soft brush to apply Stencil Remover Paste No. 5 on the mesh from both sides. STEP 4: Wait five minutes - no longer. Do not allow the stencil remover to dry on the screen, as this can result in a permanent stencil. STEP 5: Wash away the stencil with a hard spray of water, preferably a power spray.