Available Roll Sizes:
40"x300"
44"x300" Please allow extra time.


Ulano Blue Poly 2 Indirect films offer superior fine detail reproduction; sharp printing edges; uniform stencil thickness; predictable standardized exposures; close control of stencil thickness, hence ink deposit; fast and simple stencil production; and easy stencil removal for efficient mesh recovery. All Ulano Blue Poly 2 gelatin-based Indirect Films are totally solvent resistant. The topcoat on Ulano Indirect Films prevents tackiness underconditions of heat and high humidity.
Ulano Blue Poly 2 Gelatin Indirect System Photographic Films provide the ultimate in stencil resolution and definition. The film is exposed, developed in A + B solution to harden the exposed aread, (except Ulanolux UP3 and Pulsar), washed out and adhered to the mesh of a screen. After drying and blocking out, the transparent backing is removed.

All Indirect System Photographic Films consist of a light-sensitive emulsion coated on a transparent base or backing sheet, with special adhesives.
Indirect Films, (sometimes referred to as transfer films), are ideal for applications involving shorter (2,000 - 4,000 impressions) printing runs, fine details, and excellent definition; and for easy, reproducible, clean stencil production.

EXPOSURE TIPS

Underexposed: Stencil will be thin (and look thin) resulting in poor press endurance. Underexposing for resolution much finer than the job you will print sacrifices durability. 

Overexposed: Stencil will be thick (and look thick) resulting in poor adhesion due to overhardening.

Benefits
    •    Press-ready stencils in as little as 30 minutes
    •    Stencil thickness, hence ink deposit, can be adjusted by exposure
    •    Superior solvent resistance
    •    Dimensional stability of backing material promotes excellent registration
    •    Humidity-protective topcoat layer guards against tackiness under humid conditions
    •    Completely phthalate free
    •    Simple handling requirements
    •    No messy chemicals, no liquid emulsions
    •    No darkroom or soft-blanket vacuum frame required
    •    Presensitized
    •    Stencil can be examined before transfer to screen
    •    Excellent storage properties
    •    Fast, easy stencil removal
    •    Optical flatness of support layer promotes excellent definition for line and halftone work.

ULANO BLUE POLY 2, medium thickness emulsion on a 2-mil optically flat polyester backing. Combines wide exposure latitude with excellent resolution. Ideal for general screen printing work. Resolution: 75 - 100 microns (3 - 4 mils).


ULANO BLUE POLY 2