This 7.5 mil glossy paper was specially coated for solvent ink printing at a very attrractive price point. It has a good white point and gloss level for a wide variety of indoor graphic applications. A heat assist of 30-35° C (86-95° F) is helpful with this product, but care should be taken not to heat the paper too aggressively.

Usage
		Photobase Paper should be handled with care before and after printing to prevent surface contamination that may spoil the print. The paper should be processed in an environment of 65°-85° F (18°-30°C) and 30-70% relative humidity (non-condensing) that is clean and relatively dust-free. Also, some media are affixed strongly to the core and care should be taken to avoid machine issues due to the non-release of media at the end of the roll. Store this product in its original packaging in a cool dry area until ready for processing. If storage conditions are outside the recommended operating ranges, allow the paper to acclimate in the specified range for at least 24-48 hours before use.
	Applications
		Full-color graphics for indoor applications such as photographic reproductions, trade show graphics, and point-of-purchase displays. This paper is fairly sturdy and water-resistant, but should be protected against scratching. This paper can be mounted and laminated with low temperature (optimal temperature range 185°-195° F) thermal laminates, and high quality pressure-sensitive overlaminate films. Optimally, we recommend waiting 12-24 hours after printing before laminating. A liquid laminate can also be used, but testing a particular brand before application to the finished banner is strongly recommended. Care should also be taken to allow this product to fully cure before finishing it with any type of laminate.