Gecko Flex Glitter 19"

Heat Transfer Display Materials
APPLICATION

A colorful selection of durable materials with a full bodied glitter effect. Our Gecko Flex Glitter

comes with an adhesive that provides users with easy weeding, for even small complex designs.

Transferable onto textiles like cotton, polyester, and cotton/poly blends.

GECKO FLEX GLITTER APPLICATION INSTRUCTIONS

1. Heating Temperature

320 degree farenhieght.(160 degree Celsius.)

2. Pressure &Time

10 - 15 seconds with Medium pressure.

3. Washing Temperature

under 40 degree Celsius.

4. Application Instruction

Cutting Application (Plotter cut, die cut, or laser cut)

A. Plotter cut letters, numbers, or designs on Hot Melt layer.

B. Remove unwanted area and go to Heat Press Application process.

Heat Press Application

a. Press at the above heating temperature for 10 - 15 seconds from top pet protective film with

medium pressure (700KGS/SQ.CM).

b. Lift up press.

Yocu. may peel off pet protective layer on top of reflective layer without cooling.

5. Care Guide

a.Turn garment inside out, machine wash.

b. Cool/warm water temperature, line dry.

6. Wash Testing Results

After 5 cycles (30 minutes per cycle and natural line-dry clothes before another cycle.)

Under 40 degrees Celsius; no excessive change in adhesion, appearance, and color.

Note : Due to the various base materials on the market, the following heat transfer instruction are

given as a guideline only.