Product Description
 3M™Double Coated Urethane Foam Tapes are conformable foams that offer high
shear strength and are available with either a high temperature holding acrylic
adhesive system or a rubber adhesive system for bonding to various types of surfaces
for mounting, joining and holding.

Features
  The natural colored urethane foam tape products vary in color from white to light
yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet
radiation). This color change is normal and does not affect tape performance.

Application Techniques
 • Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
unified. Typical surface cleaning solvents are isopropyl alcohol*and water (rubbing
alcohol) or heptane.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
*Note: Be sure to follow the manufacturer’s precautions and directions for use when
using solvents.