4075 RLA Application tape

Item#:4075RLA

Shipping Options

Overview
Features

Product Description

STANDARD PAPER
HIGH TACK
REPOSITIONABLE
WIDTHS: 1.25-60 in (32-1524 mm)
LENGTH: 100 yds. (91.4 m)
THICKNESS: 4.0-4.5 (100-113)

NUMBER 1 TAPE WORLDWIDE FOR SIGN SHOPS

4075 RLA is standard weight saturated paper with high tack natural latex adhesive for clean pick up and transfer of small and medium size lettering and graphics. User friendly easy unwind and clean tearing features. Sticks and lays flat to the exposed release liner around cut vinyl graphics to protect against wrinkling, tunneling and edge curling. The most popular All Purpose Application Tape in sign shops! Available in 20 precisely-slit Factory Cut Roll sizes.

SUITABLE FOR:

- #1 all purpose application tape for sign shops
- Small to medium size plotter and die cut graphics
- RLA lay flat performance for Ready-To-Apply graphics even when rolled or stacked during shipping or long term storage

Here are the advantages of Conform® with RLA® versus standard application tape: Without RLA® graphics that are rolled and transported to the jobsite in the back of a work truck or shipped across country can end up with the application tape lifting from the liner and sticking to something else. Often the result is that one graphic ends up sticking to another graphic. To unravel this sticky situation, the installer wastes valuable time pulling tape apart. Sometimes the graphics cannot be salvaged. Graphics must be recut and remasked. Material and time are wasted. Jobs are delayed. And occasionally customer relations are damaged. Because these tapes lay flat and conform to the liners, even when rolled, the Conform® Series products resist wrinkling, tunneling and edge curling. Conform® Series 4075RLA® is the most popular application tape in the sign industry. It is a standard weight paper tape with a high tack adhesive, and is R Tape’s most popular tape for general sign work.

4075RLA® Conform Series® application tape is standard weight saturated paper coated with a high tack rubber adhesive designed specifically as a premasking of small and mid-sized die cut or prespaced vinyl and printed graphics. 4075RLA® features RLA® technology with improved adhesion to paper or film release liners.

Physical Specifications

Adhesive	Rubber-based
Color	White/Translucent
Caliper facestock	100-113 microns (4..0 -4.5 mils)
Caliper facestock + adhesive	125-138 microns (5.0 - 5.5 mils)
Adhesion to Steel*	18 - 20 N/100mm (16 - 18 oz.)
Tensile	297 N/100mm (17lb./in)
Elongation	3-4%
Tear Resistance	50
Shelf Life**	1 year

* Adhesion PSTC-1, 1 minute on stainless steel at time of manufacture. ** Stored at 22°C (72°F)/50-55 % RH

Features

Removes easily following graphics application.
If adhesive touches adhesive, Conform pulls apart easily with no adhesive delamination.
Works well in either wet or dry applications with no adhesive transfer.

Applications

Premask for small and medium size vinyl graphics.
All-purpose application tape for wet and dry applications.
Excellent for transferring graphics to banners.

Warranty

Tapes are only warranteed to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.